Hey guys I know this question gets asked alot but I just wanted to be sure I got this right. I currently have a 2012 FX4 ecoboost with a readylift 2inch level. I am interested in putting on some nitto terra grappler G2 (285/65R20) and fuel pump wheels (20×9). I just wanted to know what the best offset would be so they don't rub. The wheel I want is only available in a +1 or +20 offset. In thinking +20 would be fine and I don't want tires to stick out too much. Is anyone running a similar setup? Pictures would help. Thanks

 

+20 on the wheel and drop to a 60 vice a 65 and you will be golden.

 

So go with the 60 or 65? You put both in your response.

 

read it... it say's go with a 60 "VICE" a 65 unless you can get the wheels with a more positive offset like your stock wheels +36 or +44 ...the taller tires will rub the back of the fender well. I'm having that problem right now...I should of gone with the 60's vice the 65's.

 

[QUOTE=techrep;4174333]read it... it say's go with a 60 "VICE" a 65 unless you can get the wheels with a more positive offset like your stock wheels +36 or +44 ...the taller tires will rub the back of the fender well. I'm having that problem right now...I should of gone.
Oh ok. Do you think it is worth it to go with 65 and just do some trimming? How bad is it rubbing? Do you have any photos? Thanks again.

 

If it were me...like I just told you...I should of gone with the 60's ...they rub the back of the fender well...you would have to cut some out and I'm not doing that...trimming the front is no big deal.. the G2's may not be as bad as the grapplers though...