Level kit and UCA ball joint clearance
02-10-2014, 07:26 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Level kit and UCA ball joint clearance
Hi all,
New to the forum and this is my first post. I installed an AS 2.5 level kit and Nitto 295/60/20 trail grappler tires on my 2010 Platinum stock wheels yesterday. When we mounted the wheels we noticed that there was only about 3/16" clearance between the UCA ball joint and the sidewall tread. I went with that setup because I saw a bunch of people here have it and said thy don't have any rubbing issues. Can someone that has the same setup or close to it let me know what theirs is like? There is some other rubbing at full lock on the UCA but the proximity to the ball joint is what worries me.
Thanks for any help you can provide.
Steve
New to the forum and this is my first post. I installed an AS 2.5 level kit and Nitto 295/60/20 trail grappler tires on my 2010 Platinum stock wheels yesterday. When we mounted the wheels we noticed that there was only about 3/16" clearance between the UCA ball joint and the sidewall tread. I went with that setup because I saw a bunch of people here have it and said thy don't have any rubbing issues. Can someone that has the same setup or close to it let me know what theirs is like? There is some other rubbing at full lock on the UCA but the proximity to the ball joint is what worries me.
Thanks for any help you can provide.
Steve
