When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've narrowed it down to these two models, which are barely different in look, except for more of a bevelled face on the 703 compared to the flat face on the 316 and 12 holes on the 703 compared to 10 holes on the 316.
Method 703
Method 316
Or all together if it helps viewing them - 703 on top, 316 on the bottom
316 on top and 703 on the bottom
My current setup, if it helps, or if anyone is fancy with image manipulation
Last edited by [F2C]MaDMaXX; Jan 26, 2022 at 11:42 AM.
To me the 316's have a lot of ridges that might be a pain to clean . The valve stem looks to stick out straighter and maybe more in harms way. On the plus side smaller brand advertising on the 316 spoke. Send me whichever set you decide not to keep.
I'm goin' against the grain and vote for the 316-10 hole. Although they will be the same diameter, it looks a bit bigger, less "Ricey"?, and dare I say "Classier"? But I'm a chrome guy, so what do I know, Lol....
Hmm, i guess it's technically a bigger lip of sorts on the 316, but yes, both choices would be the same size, i'm going for 17" and both choices would be in the gloss titanium pictured.
Apparently i'm not old enough to run the wheels i have, i'm apparently fighting it looking like an old man truck with all the chrome etc.... I don't not care for chrome, but i've done bits to remove/disguise some of it, and i think it's about as balanced as it's going to get - at least i'm not running the original factory wheels that were in bright-*** PVD!
We have our D02's in stock, They are fully forged too! Just something that may peak your interest. they also are some-what similar but still a cool design!