Fitment Help
Thread Starter
Junior Member
Joined: Dec 2022
Posts: 1
Likes: 0
Fitment Help
I have a 2022 XLT with a ReadyLift 3.5" lift kit. I have Nitto Ridge Grapplers (35x11.5x20) on the stock wheel. Can anyone tell me if I can get a wheel the same size as the stock, but with a negative offset (around -18)? Will it rub or any trimming required? I'm trying to not void the warranty. Thanks.
Junior Member
Joined: Oct 2023
Posts: 8
Likes: 0
From: New Jersey
35s will rub with a 10 wide -18
you could do the bubba look and have stockers with +44 and run spacers
most guys put 35 mud grapps on a setup like that and just trim a little bit
you could do the bubba look and have stockers with +44 and run spacers
most guys put 35 mud grapps on a setup like that and just trim a little bit
Last edited by LCF; Apr 12, 2024 at 08:07 AM.