Sub install questions
11-06-2014, 05:13 PM
#1
Coonass
Thread Starter
Sub install questions
I've searched page after page and haven't found an answer...
I recently purchased a '10 Platinum with the Sony system (no nav). When I lifted the rear seats I noticed it had a power, ground, and remote wire coming from a hole in the carpet, but no RCA's.
From what I've read on the site, you can't run your RCA's from the rear of the stock radio with a PAC, but you have to tap into the stock subwoofer wires in the back... and please correct me if i'm wrong.
Whats the best way to do this, and do you have a link to provide pictures on how to do it? I will pull the stock subwoofer out tonight and see if I noticed where the previous owner may have tapped into it already.
I recently purchased a '10 Platinum with the Sony system (no nav). When I lifted the rear seats I noticed it had a power, ground, and remote wire coming from a hole in the carpet, but no RCA's.
From what I've read on the site, you can't run your RCA's from the rear of the stock radio with a PAC, but you have to tap into the stock subwoofer wires in the back... and please correct me if i'm wrong.
Whats the best way to do this, and do you have a link to provide pictures on how to do it? I will pull the stock subwoofer out tonight and see if I noticed where the previous owner may have tapped into it already.
11-06-2014, 06:11 PM
#2
Coonass
Thread Starter
So from what I see, he did tap into the stock sub's wiring... Do I connect a LOC there? What's a good one to use?
Last edited by natalie; 11-06-2014 at 06:41 PM.
