Lucky's150

I'm trying to connect my FO1 T-Harness to the DNX890 harness and the Maestro RR instructions state to connect the orange wires (parking light) together. I have an orange wire on the FO1 harness, but no Orange on the DNX harness. I have a Orange/white wire marked "ILLUM". Is that the same wire? Do I connect them together, or do I leave them both alone?

Feathermerchant

The 'Illum' wire to the orange wire is correct. Once you get it running, hold down the soft 'MENU' (by soft - button on the screen) and you will get a menu that you can use to select brightness and contrast for lights on and lights off.

Lucky's150

Great, thank you.

jerparker1

Got mine installed last weekend. Can't say enough good things about this receiver! My favorite part are the gauges & tire pressure screens! It took me about 4 hrs to install it. The hardest part was splicing into the 2 diagnostic wires. I got a refurb from Crutchfield for $459. That was a lot easier to talk the wife into instead of $999.

Feathermerchant

Looks like mine. I love the gauges also.

Toddman38

iTrader: (5)

Looks ***** Jerparker1! Love that HU, thats a hell of a price too...

Toddman38

iTrader: (5)

Only in my dreams...

jerparker1

Is there a way to change the time to 24-hour format?

12V Guy

I think you press and hold on the clock display.

Feathermerchant

Expecting my new KW DNX890HD today.

Hey 12V guy - I tried to use Synch to request a vehicle health report
http://support.ford.com/sync-technol...th-report-sync
and got the response that the vehicle had to be running at least one minute before I could make the request. Any ideas?