bblue02

this is sick, just what I needed. thanks so much!

97_4.6_stepside

Before u start check to make sure it will fit. It should as long as the seats aren't too much different and use 3/4 inch mdf

97_4.6_stepside

And throw some pics up when u get finished

bblue02

will do. it might be a while though.. I'll probably do it over Christmas break in a couple weeks. that way I'll have plenty of time

97_4.6_stepside

Ok

bblue02

so I'm about 80% done with my box, one question... how in the hell do you cut the holes where the subs go in at? the only thing I'm thinking of is a jig saw... if you know of a better/ more efficient way please let me know!

97_4.6_stepside

Router work best with a stencil. But I just used a router and turned out fine. Just mark the middle of your circle and take thin piece of Plexiglas or something and drill a hole in one energy and another half the width of your sub away. If that makes sense. Then drill drill a hole in the middle of your box and stick the drill bit in the hole and your Plexiglas jig and draw a circle with a pencil. Does that make sense?

97_4.6_stepside

Jigsaw sorry* I used a jigsaw

bblue02

yeah ive already got the circles drawn now I just gotta cut them out.. lol wish me luck

bblue02

here's a picture, 2002 single cab! 2 10's