JVC HU wiring issues
#1
Member
Thread Starter
Join Date: May 2012
Location: Wisconsin
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
JVC HU wiring issues
i have an 88 f150 that i bought a few months ago, and put in a new jvc headunit because the stock one wasnt working. so i had it all wired up and all that, working fine. then it just decided to stop working on me,.
all the fuses are still good. and was wondering what might be the problem? im not very good with wiring and all that, so any help would be much appreciated!
all the fuses are still good. and was wondering what might be the problem? im not very good with wiring and all that, so any help would be much appreciated!
#2
Senior Member
iTrader: (1)
i have an 88 f150 that i bought a few months ago, and put in a new jvc headunit because the stock one wasnt working. so i had it all wired up and all that, working fine. then it just decided to stop working on me,.
all the fuses are still good. and was wondering what might be the problem? im not very good with wiring and all that, so any help would be much appreciated!
all the fuses are still good. and was wondering what might be the problem? im not very good with wiring and all that, so any help would be much appreciated!
#3
F150 Forum
It's been a while since I have personally worked on that year truck, but you should see if the cigarette lighter still works, I believe it is on the same fuse circuit. If it works odds are good you are getting 12v to the radio.
With fuses you need to check teh one on the panel in the truck as well as the ones inline on the back of the radio.
If those are all good, then ensuring that it has a solid ground. Perhaps a crimp is loose, solder joint bad, ground point came off etc.
How are the 2 harnesses connected to the factory harness?
With fuses you need to check teh one on the panel in the truck as well as the ones inline on the back of the radio.
If those are all good, then ensuring that it has a solid ground. Perhaps a crimp is loose, solder joint bad, ground point came off etc.
How are the 2 harnesses connected to the factory harness?