Ford F150 Forum - Community of Ford Truck Fans

Ford F150 Forum - Community of Ford Truck Fans (https://www.f150forum.com/)
-   Stereo/Audio (https://www.f150forum.com/f30/)
-   -   Help Needed: Door speakers stopped working, steering wheel control acting funny (https://www.f150forum.com/f30/help-needed-door-speakers-stopped-working-steering-wheel-control-acting-funny-529909/)

2Morrow 09-30-2022 02:46 AM

Help Needed: Door speakers stopped working, steering wheel control acting funny
 
Hi F-150 forum fam,

I got a ‘18 XLT SCREW and a couple days ago my door speakers stopped working. The only ones that work is the center dash and subwoofer. Hard to tell if the A-pillar tweeters are gone.


The radio control on the steering wheel is acting funny too. Channel toggle right will toggle left a lot. Volume up will change the source (FM to Sat radio) etc. It’s F’in annoying.

In an attempt to fix it I reset the radio twice. Didn’t help.

I also unplugged the battery for about 30 minutes but that didn’t change anything either.

Since all 4 door speakers aren’t working I’m wondering if the APIM is shot or burnt out. Not too sure if that will help the the Steering W heel buttons.

I'm also looking around the forum for similar situations and fixes but no luck.

Any help/wisdom in this will be greatly appreciated!

Thanks,
Todd Morrow

dpuc10 09-30-2022 10:24 AM

Pull your ACM, not the APIM, and make sure the connectors are fully seated. You can try the APIM as well, but I would start with the ACM by unplugging and replugging both large connectors.

2Morrow 09-30-2022 11:39 AM


Originally Posted by dpuc10 (Post 7295074)
Pull your ACM, not the APIM, and make sure the connectors are fully seated. You can try the APIM as well, but I would start with the ACM by unplugging and replugging both large connectors.

I will do that, thank you!

Question, if I need to replace the ACM would I need to get a specific unit tailored to the 8" Sync unit or would any off the shelf item work? Thanks in Advance!

dpuc10 09-30-2022 11:58 AM

You can use any ACM unit as long as you can program it with ForScan or find a truck with the exact features as your truck. Being an 18, I would get an ACM from an 18 or newer or you may have programming issues.

2Morrow 09-30-2022 12:00 PM


Originally Posted by dpuc10 (Post 7295138)
You can use any ACM unit as long as you can program it with ForScan or find a truck with the exact features as your truck. Being an 18, I would get an ACM from an 18 or newer or you may have programming issues.

Awesome, thanks man.


All times are GMT -4. The time now is 02:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands