PMONRI

I'm sure they'll ship it to you. That box was quoted to me at $650 without subs. Where are you located?

CrashTECH

Not sure I'd want to give up the seat though...

PMONRI

Your thinking like I did. At first I wanted the L-Shape with plexiglass but went with the under the seat box after lifting the seat with an LMI 2.5" lift kit. Then had two JL10W6V2-4's installed powered by a Rockford T1500, see photo.

XPerties

Did you build that and do you have any other photos?

PMONRI

I had the box built and installed with many new things. I am in France working for an extended time and haven't seen or heard the system and only have the photo the guy at the shop sent me, which is already posted. I will be heading home on May 21st and if you want I can take some photos and dimentions and post them around the 23rd.

Since the truck has downtime I had the audio work and the CAI, Catback Exhaust and EDGE installed.

whothere

this box with blueish light in it is a must have and would like to find out more about it or a contact numbe ror email of who made it to ask them more about it
[/quote]

SoundfxRI

Soundfx in Rhode Island Designed and produced both the under seat and the plexi and LED boxes in this thread. We build custom boxes on the premises for many makes and models of cars and trucks. WWW.soundfxonline.com. (401)826-2626...... End of commercial.....

I stumbled on this post after looking at replacement exhaust systems for my F150, a pleasant surprise.

trapshooter200

where do you find a box like this?

Uglyduckling

That's baisucally the box I'm building for th back of my 97, I didn't want to lose most of my seating in the back so I'm only taking up one, I'm making one for 2 12's amped and 2 6x9's sharing an amp with the 2 6's under the seat

Smitha6

Thats sick! I'm doing something like this except I have 4 captians Chairs so mine wont sit on the seat, i'm gonna take out the center console and put it in its place...but same concept as this, 2 down firing subs inside...except i'll have TWO KICKER 12" L7's!!

I was gonna carpet it to match and get the King Ranch emblem etched into the wood then the carpet over but this looks SWEET, i just dont know what color LED's id get...?

Also, it'd probably cost a good bit more...I'm only getting mine professonally done for $300...O and its ported!! Cant wait!