Anyone know about designing boxes??
03-09-2011, 08:12 AM
#11
Huh?
Thread Starter
Www.thrillercaraudio.com
A single 6" kit will work for u and an aeroport is about 1000x more simple than a slot u just cut a round whole and screw it in and ductape together. All u need to do is build that exact box and put the 6" aeroport kit in it. Build it so the box sits all the way in the back of the trunk like were the trunk latch is, face the subs toward the seat and put the aeroport in the drivers side bottom back corner an Wala instant loud trunk
A single 6" kit will work for u and an aeroport is about 1000x more simple than a slot u just cut a round whole and screw it in and ductape together. All u need to do is build that exact box and put the 6" aeroport kit in it. Build it so the box sits all the way in the back of the trunk like were the trunk latch is, face the subs toward the seat and put the aeroport in the drivers side bottom back corner an Wala instant loud trunk
Hmmm your link isnt working.. Also sometimes I have to use my trunk so im not sure If I could put the box where the trunk latch is because then I wouldnt have a trunk
03-09-2011, 01:52 PM
#12
To be the loudest u have to make sacrifices! But u can just build it the same way and face the subs back.
Try this
Www.madisound.com
Try this
Www.madisound.com
03-09-2011, 10:00 PM
#13
Huh?
Thread Starter
Eh no need to be the loudest haha anyway I looked at the aeroports and it looks good but its $40 for the port and being this is gonna be the first box Ill be making im gonna try to do just wood for now to keep it cheap incase things dont work..
So I spent alot more time researching and trying to get this thing designed.. I found this page " http://www.moddedmustangs.com/forums...oofer-box.html " To be really helpful.. So Heres what I came up with so far..
What do you think?? does it look right?
So I spent alot more time researching and trying to get this thing designed.. I found this page " http://www.moddedmustangs.com/forums...oofer-box.html " To be really helpful.. So Heres what I came up with so far..
What do you think?? does it look right?
03-09-2011, 11:55 PM
#14
Why would you build it like that when I just told you fire the port the the drivers side... That design will be no different than a prefab. The way i say make the box is an actual design ment for the car not just something I threw together in some program. It's been a proven trunk box design after countless hours of testing.
03-10-2011, 12:22 AM
#16
No,no,no u would just put the port on the backwall of the box. From the front you wouldn't see the port just the subs. Then make your port say 5" wide. So bassicly it would look like you had two back panels but the inside peice would be shorter. I wish I had something other than this iPhone I would draw it up on google sketch