2017 Sport Aftermarket Amp not turning on
#1
2017 Sport Aftermarket Amp not turning on
Ok in the middle of getting my system hooked up.
What I have done ...
1.Direct power wire from the battery
2.WPT 12-12 connector with the brown wire for my remote wire, purple wire for the + and the green for - (stripped RCA to speaker wire)
3.Did the Forscan change to the ACM 727-01-01 4th number to 8
I'm having issues with the remote wire not turnning on the amp. Should I just forget the factory plug at the rear of the truck and tap into fuse #23 ??
Thanks
Thanks
What I have done ...
1.Direct power wire from the battery
2.WPT 12-12 connector with the brown wire for my remote wire, purple wire for the + and the green for - (stripped RCA to speaker wire)
3.Did the Forscan change to the ACM 727-01-01 4th number to 8
I'm having issues with the remote wire not turnning on the amp. Should I just forget the factory plug at the rear of the truck and tap into fuse #23 ??
Thanks
Thanks
Last edited by 17Sport; 04-08-2019 at 07:24 PM.
The following users liked this post:
17Sport (04-09-2019)
#3
#4
Senior Member
that remote wire from the harness doesn't supply enough volts for a remote turn on.. you have to go to the fuse box
The following users liked this post:
17Sport (04-09-2019)
#5
#6
got amp on now but no signal to subs
Ok i've got the amp turning on now.
But I do not have any sound/signal going to my subs. I've used the WPT1212 wire harness and wired in RCA's to the + and - leads off the harness at the rear of the truck. I've turned on the forscan option but still no signal.
Do I need to do a lineout converter? If so where should I hook it up at? Plus what brand should i be looking at if they are any different.
Thanks!
But I do not have any sound/signal going to my subs. I've used the WPT1212 wire harness and wired in RCA's to the + and - leads off the harness at the rear of the truck. I've turned on the forscan option but still no signal.
Do I need to do a lineout converter? If so where should I hook it up at? Plus what brand should i be looking at if they are any different.
Thanks!
#7
Ok i've got the amp turning on now.
But I do not have any sound/signal going to my subs. I've used the WPT1212 wire harness and wired in RCA's to the + and - leads off the harness at the rear of the truck. I've turned on the forscan option but still no signal.
Do I need to do a lineout converter? If so where should I hook it up at? Plus what brand should i be looking at if they are any different.
Thanks!
But I do not have any sound/signal going to my subs. I've used the WPT1212 wire harness and wired in RCA's to the + and - leads off the harness at the rear of the truck. I've turned on the forscan option but still no signal.
Do I need to do a lineout converter? If so where should I hook it up at? Plus what brand should i be looking at if they are any different.
Thanks!
Trending Topics
#8
Senior Member
do you have Satellite Radio? for some trucks the harness did not work.. my truck included i ended up having to use the FOR11-CK harness .. seems to be narrowed down to trucks without satellite radio
#9
satellite radio yes...
yes my truck does have satellite radio. What's the scoop on the FOR11-CK harness. Should I just run a LOC ?