Mattsdad

1Chad - Thanks for the clarifications. Thanks also to the others that contributed to this post.

BStrummin

I used fuse 23 in the passenger box for the amp turn on. FYI you'll need a MICRO fuse tap, which for me was somewhat difficult to find locally.

pjgnall

I seem to be having trouble with getting the door latch cable to come loose from the handle, tried it on the back door first and cracked the plastic attached to the cable, investigated after i cracked it and i see how it goes together but getting it apart is not going as easy as I have seen in some videos...whats the trick? Thank You!

youngduece77

A BIG, BIG thank you for posting these pictures as I was about to replace my factory door speakers!


All went well with using the existing brackets! I cannot thank you enough!!!


BTW, I did not totally remove any of the front door panels...I merely unhooked the power lock connection and lifted the door up from the bottom and went underneath to disconnect the speakers and reattach them...


Again, thanks a million!

BBQ BOY

Why didn't you go active?

TexasFording

iTrader: (14)

sub'd

Ricop2007

Anyone tried this install in ecoboost?

Read in another forum "fake engine noise from front speakers was amplified in new configuration"

2015 XLT2.7 ecoboost

Spork82

Only on Lariet and higher models

T22A80

Can someone confirm that the sepaker harness that plugs into the door speakers is the same as the one that goes to the a-pillar tweeters?

Thanks

Wyo11Scab

iTrader: (1)

Yes. As long as you don't have a Sony