2015 Dash kit
#521
Just got my RPK4-FD2201 installed in my truck with a Pioneer AVH-X4500BT head unit.
Everything works (sorry I don't have rear defrost to check) except for the VR voice SWC control.
Anyone else had this issue?
I've gotta find a high pitch ground noise too. Doesn't change volume with audio, just steady, on every source, goes away when HU put into off mode.
Wondering if the old unit has just gone bad...
Everything works (sorry I don't have rear defrost to check) except for the VR voice SWC control.
Anyone else had this issue?
I've gotta find a high pitch ground noise too. Doesn't change volume with audio, just steady, on every source, goes away when HU put into off mode.
Wondering if the old unit has just gone bad...
#522
Super Member
iTrader: (1)
I have a 4200 NEX no high pitched noise issues. Both voice and steering wheel controls are working fine. I recall someone earlier with a Pioneer having issues and they had their steering wheel controls plugged into the mic connection by mistake as they look the same.
Just got my RPK4-FD2201 installed in my truck with a Pioneer AVH-X4500BT head unit.
Everything works (sorry I don't have rear defrost to check) except for the VR voice SWC control.
Anyone else had this issue?
I've gotta find a high pitch ground noise too. Doesn't change volume with audio, just steady, on every source, goes away when HU put into off mode.
Wondering if the old unit has just gone bad...
Everything works (sorry I don't have rear defrost to check) except for the VR voice SWC control.
Anyone else had this issue?
I've gotta find a high pitch ground noise too. Doesn't change volume with audio, just steady, on every source, goes away when HU put into off mode.
Wondering if the old unit has just gone bad...
#523
On down the highway
iTrader: (4)
Join Date: Aug 2014
Location: Not far enough away from Chicago
Posts: 24,987
Received 1,679 Likes
on
1,094 Posts
Well folks, I missed this thread from like a month ago... maestro has their kit out for 15+ One member has it and loves it
https://www.f150forum.com/f30/2015-f...lution-402314/
I would buy it myself for the datalink compatibility with my kenwood deck, but am on the fence right now of getting a new truck
https://www.f150forum.com/f30/2015-f...lution-402314/
I would buy it myself for the datalink compatibility with my kenwood deck, but am on the fence right now of getting a new truck
Last edited by Truckin; 01-25-2018 at 12:23 AM.
The following users liked this post:
Wyo11Scab (02-07-2018)
#525
I haven't been around here for a while now..i made the jump to the FTR1 with the idatalink maestro and dumped the Scoche kit that i had to keep pulling the 7.5amp fuse once a week to get the AC controls back.. Man what a difference in over all quality and back to my OEM HVAC controls.. I also love how you can have each button assigned how ever you want. You can even press and hold the buttons for different assigned functions while retaining the original single button press..works like a champ.
The following users liked this post:
bryan_c (05-19-2018)
#526
I haven't been around here for a while now..i made the jump to the FTR1 with the idatalink maestro and dumped the Scoche kit that i had to keep pulling the 7.5amp fuse once a week to get the AC controls back.. Man what a difference in over all quality and back to my OEM HVAC controls.. I also love how you can have each button assigned how ever you want. You can even press and hold the buttons for different assigned functions while retaining the original single button press..works like a champ.
#527
you're gonna dig it... flashing the maestro was a PITA on windows 10 so be prepared for that. But the end result is great.. My opinion is to not flash in Sync. You'll have to pair sync to your phone even if your phone is already connected to the radio's bluetooth. And if you dont connect Sync you'll keep getting a no phone connected pop up message on the radio.. FTR1 w/ Kenwood DNX995S here on my end. I do miss the clock and temperature on the scosche 4" screen though.
#528
you're gonna dig it... flashing the maestro was a PITA on windows 10 so be prepared for that. But the end result is great.. My opinion is to not flash in Sync. You'll have to pair sync to your phone even if your phone is already connected to the radio's bluetooth. And if you dont connect Sync you'll keep getting a no phone connected pop up message on the radio.. FTR1 w/ Kenwood DNX995S here on my end. I do miss the clock and temperature on the scosche 4" screen though.
#529
ok well my phone and my wife’s are already paired to sync so just keep it that way and connect to the new headset Bluetooth as well? And by not flash in Sync do you mean when it comes to setting up the module? Also i hate windows ten already with a passion so i guess now i know it will be a pain ahead of time i can try and not get as frustrated! Lol