I have a 2011 XLT. A guy I know has the center stack with navigation, 6 disk changer, auto climate control, and heated seat control out of a 2011 Lariat. I know the heated seat control won't work but is the wiring behind the dash to plug everything else in? Or would that be alot of $ and a pain to get the right wiring harness? Thank you everbody for your advice in advance.

 

Does anybody know? Help would be greatly appreciated. Thank you.

 

ttt

 

I've been wondering something similar. I have an XLT and it has a little vent with a computer chip behind it in the dash that I've heard is an interior temp. sensor. I was wondering if I found auto climate controls if I could swap out my manuals.

 

Well I am not 100% sure but here is what I did. I traded out my mirrors to Heated tow mirrors. I had to buy the controller also because I wanted to stay as close to factory as I could. For a test I just plugged in the mirrors and the controller and everything worked so all the wiring was there. So if I where a betting man I would say all the wiring is there you will just need what ever sensor or other device it may connect up to. As for the person with the internal temp and dual zone question I am not sure the sensors are all there to make it work, but if you find out it does post back here cause I want to do the same thing.