10" SM sub box, for 2016 screw
#41
One Clean Machine
Thread Starter
iTrader: (5)
Should be here this Thursday! Cant wait! How do you like yours?
If this doesnt make me Happy, itll be a Sundown Audio SD3 10, or JL W3 10!
The following users liked this post:
jbarron74 (10-05-2016)
#42
One Clean Machine
Thread Starter
iTrader: (5)
Got the Kicker Comp RT 10, swapped .... The Kicker, hits alot better than the crummy RF sub I had.
The Kicker sounds 10x better, so glad I decided to get the Kicker. Almost went with a higher level RF sub instead!
Happy, happy, happy...
The Kicker sounds 10x better, so glad I decided to get the Kicker. Almost went with a higher level RF sub instead!
Happy, happy, happy...
The following users liked this post:
Derekmc626 (07-17-2020)
#43
Hows the fitment with the seat up and latched? I saw the one picture but couldnt tell if that was with the seat up or down.
#44
One Clean Machine
Thread Starter
iTrader: (5)
I have 2" of cleareance from the subs rubber surround, to the back of the seat! More than plenty...
That was with the seat latched, in the up position...
That was with the seat latched, in the up position...
#45
Wow thats alot. I have my test box mocked up to those dimensions. Im gonna check tonight. Did you cut the carpet padding? I assume you didnt since its sitting atop the stud
#46
One Clean Machine
Thread Starter
iTrader: (5)
Yes, cutting the pad is a Must! I placed my box against it, traced, and cut with a razor knife.
#47
#48
One Clean Machine
Thread Starter
iTrader: (5)
No need to cut the bottom carpeting.
#49
Official HTT Greeter
Wanted to add a Pic, of my Alpine amp installed & working. As it arrived tonight, and I was able to swing by the Dealer on my way home from work, to get my rear Sub connector enabled On! My buddy at the Dealership, said he wasn't aware there was a Spare connector if the truck didn't come with a sub, and that it could be Enabled.
Tech, was surprised too.. As I used it to get the Music & Remote Turn On Signal to my amp. Service buddy, said to swing back by tommorrow, to let him know if it worked, as I didn't have my Amp yet. He wanted to know for future reference, and for future customers! Service Tech, double checked after turning ignition off, that it stayed Enabled. Since, there wasn't a Sub connected yet! He said sometimes the vehicle will Unenable the option(new to me)? But, it didn't...
I cut a piece of 1x10x9 plywood, wrapped in carpet (to avoid any rattels), then screwed the amp down to the plywood, through the oem carpet padding!
So far, it works great, and I'm happy with the Much needed Bass addition...
Tech, was surprised too.. As I used it to get the Music & Remote Turn On Signal to my amp. Service buddy, said to swing back by tommorrow, to let him know if it worked, as I didn't have my Amp yet. He wanted to know for future reference, and for future customers! Service Tech, double checked after turning ignition off, that it stayed Enabled. Since, there wasn't a Sub connected yet! He said sometimes the vehicle will Unenable the option(new to me)? But, it didn't...
I cut a piece of 1x10x9 plywood, wrapped in carpet (to avoid any rattels), then screwed the amp down to the plywood, through the oem carpet padding!
So far, it works great, and I'm happy with the Much needed Bass addition...
I'm planning to add a 12" sub (if it'll fit, mounting depth is 5.75") and I think a max 800W amp I can't remember for sure as it's still in my other truck.
My question is about the factory sub harness. Are you using it for remote/turn-on and for audio signals? or did you tap the rear speakers.
I'd prefer to use the OEM harness and just turn it on with ForScan or something. If that's possible without having to mess with the OEM speakers. At least until I decide to replace them.
Thanks
My truck details are in my sig.
#50
Senior Member
I am using OEM with Rockford but want to get a bigger sub. Someone installed 2 12" behind the seat but never cared to share dimensions
https://www.f150forum.com/f118/diy-2...ew-cab-330236/
https://www.f150forum.com/f118/diy-2...ew-cab-330236/