10" SM sub box, for 2016 screw
#1
One Clean Machine
Thread Starter
iTrader: (5)
10" SM sub box, for 2016 screw
Where's a good place to pickup a sub box, for a shallow mount 10", for a 2016 screw cab? is 5" deep at top, and 8" bottom to much?
Also a good 10" shallow mount sub, for 200.00 or Less?
Also a good 10" shallow mount sub, for 200.00 or Less?
Last edited by Toddman38; 09-01-2016 at 07:22 PM.
#2
One Clean Machine
Thread Starter
iTrader: (5)
Thinking of this sub...
https://www.amazon.com/dp/B00VRFSCXO...I33ECDH70VYH4K
In this box, behind rear seat....
https://www.amazon.com/dp/B0013MYXD4...GXRDEX8C&psc=1
https://www.amazon.com/dp/B00VRFSCXO...I33ECDH70VYH4K
In this box, behind rear seat....
https://www.amazon.com/dp/B0013MYXD4...GXRDEX8C&psc=1
#3
One Clean Machine
Thread Starter
iTrader: (5)
#4
Fake Ballin for da Gram
iTrader: (12)
Todd, that box might be too thick...
I have this box below. I've seen another member in one of the threads that has the same box installed but some of the wall carpeting needs to be removed. Havent had a chance to try it since we've got a hurricane coming. This sub is well below $200 with the box.
https://www.amazon.com/Pioneer-TSSWX.../dp/B00JQTU3QC
I have this box below. I've seen another member in one of the threads that has the same box installed but some of the wall carpeting needs to be removed. Havent had a chance to try it since we've got a hurricane coming. This sub is well below $200 with the box.
https://www.amazon.com/Pioneer-TSSWX.../dp/B00JQTU3QC
The following users liked this post:
Toddman38 (09-01-2016)
#5
One Clean Machine
Thread Starter
iTrader: (5)
How about a good prefabbed carpeted 10" single sub box, that fits underseat, without protruding out!
#6
One Clean Machine
Thread Starter
iTrader: (5)
I also, have no problem cutting the rear wall carpet to fit a box! I prefer everything, out of Sight!!!
#7
Fake Ballin for da Gram
iTrader: (12)
here you go... post #173. i used the same sub under the rear seat of my 14.
https://www.f150forum.com/f30/wiring...8/#post4895967
https://www.f150forum.com/f30/wiring...8/#post4895967
Trending Topics
#8
One Clean Machine
Thread Starter
iTrader: (5)
I'm going to go with this preloaded and made Rockford Fosgate 10" shallow mount sub and box... it measures 19 Lx 3.25 at top x5.25 at bottom...
https://www.amazon.com/gp/product/B0...A1SX1R00E2EUMR
Then this Rockford amp, all behind the seat!
https://www.amazon.com/gp/product/B0...A1SX1R00E2EUMR
https://www.amazon.com/gp/product/B0...A1SX1R00E2EUMR
Then this Rockford amp, all behind the seat!
https://www.amazon.com/gp/product/B0...A1SX1R00E2EUMR
#10
One Clean Machine
Thread Starter
iTrader: (5)
Will do, I thinking I'll skip the Pac, and use the speaker inputs on the amp to tap the rear speakers, that will work for music signal, and remote turn on? Or will I still need to run a remote wire?