well im new to this site not to the forum world i have and 06 super cab 4x4 xlt my problem it the ing power windows passenger side wont work heres what it does. i took the door apart and pulled the motoer out powered up the truck passenger side switch makes it rool up but not down drivers side wont make it move at all, so i cliped a new motor in and the same thing happened i have tried new drivers side master control and a used passenger side switch somebody please help me

 

Welcome to the forums.

 

one of these
-Fuse
-Circuitry
-Instrument cluster module (ICM)
-Accessory delay relay
-Driver window control switch
good luck

or- theres a TSB about how to fix a slow raise speed(i know not your issue but worth a shot, maybe you just get a different symptom)
Inspect the glass runs to make sure they are not wavy and causing additional resistance to the glass.
Remove the door panel
Loosen the glass clamps (using a 1/4" drive T-30 Torx socket).
After loosening the glass clamps, the glass should be pushed up into the header, by hand, then shifted rearward, until it stops against the rear window run seal, and then lowered back into the clamps
good luck!