master clinderylinder or slave sy
Thread Starter
Junior Member
Joined: May 2012
Posts: 7
Likes: 0
master clinderylinder or slave sy
I have 1997 ford f150 4.6 liter 4x4 manual. My truck will not go into gear if the truck is started but will go into gear if its turned off. I purchased a new master cylinder for it and installed it but that didnt fix it. I have bled it really good I had no clutch at all when I first started it the clutch went to the floor very easily. After I bled it then the clutch went back to the way it was before but it still wont go into gear. Im out of things to do to it. I need some help. thanks for anyone whos willing to help.
TRENDSETTER
Joined: Mar 2011
Posts: 477
Likes: 15
From: spring, TX
its probably the slave cylinder, all the 98+ rangers have this problem as well, i think i bled mine every other day for a month before i went and bought a new one, worked great after that, check your fluid level and hydraulic lines for leaks, check in the inspection window on the side of the trans for internal leaking as well. i may be wrong, but if the rangers have this same problem then maybe you do too...
