hey, just an 18yo in northern vermont that picked up a 1995 f150 XLT from NH, already lifted 9" (6" susp. 3" body), pretty worn 38's, and a few issues to boot.
Since ive gotten it:

• Replaced the wiper motor
• Replaced inner tie rod end
• Rebuilt tranny
• tightened all the bolts on the front end('78 3/4 ton front axle swap, axle would shift under body with some bumps)
• tightened the bolts on the steering box(a good 6-8 inches of wheel play )
• replaced the exhaust from headers back with straight 2.5" tubing to a 28" glasspack right after the cab
• Replaced what i thought was a faulty thermostat

Took it out for some light mudding two weeks after getting it and toasted the e4od tranny, had that rebuilt and works great so far. On the immediate to do list are O2 sensor, rear ABS sensor, and the middle two cab mounts so i can get it inspected and drivable. Right now it has a NH inspection on it but needs a VT inspection, so havent driven it much which is very disappointing haha. Looking forward to talking with everyone on here.
Drive fast, Take chances!

 

Thanks for joining, it's great to have you here
Tony

 

Hello and welcome to the site! Glad to have you here. Sounds like you have really nice truck and doing great job on it. Share with us some pictures when you can. This forum really is a ton of help. With a little bit of research you can find an answer to all your questions.