Hi All-I'm new to this site. I have a 2016 F-150 XLT with a single control HVAC. I was experiencing Max heat yesterday and today, I had no heat. I traced it to what I think is called the "Blend Door Actuator". This is located below the dash on the passenger side near the floor to the left of the cabin air filter. I can "persuade" the motor to change with the Heat control **** on the dash and provide heat,and the turn down the level of heat with the **** control. But then I have to "persuade" the cam on the Actuator to move again. My question is, how do I replace this Blend Door Actuator? Any suggestions would be greatly appreciated.

 

Welcome to the forum. Watch the video in the link I provided, that might help you.
how to replace the blend door actuator on a 2016 F150 - Google Search

 

Welcome..
.

 

Thanks for the link, Mike! After seeing the video, it only took me about 30 minutes. Piece of cake. I now have heat here in Central New York where it was 10 degrees this morning.

 

My truck is blowing cold air on the driver side and hot air on the passenger side, I replaced the blonde door actuator and that did not solve the problem. I bought a heater control valve but I can not find where the heater control valve is located at. Has anybody replaced one of these before? 2016 3.5 eco boost.