Topic Sponsor
Introductions New to the site? Introduce yourself!
Sponsored by:
Sponsored by:

Another new guy here.

Thread Tools
 
Search this Thread
 
Old Feb 7, 2016 | 07:08 PM
  #1  
JCFindley's Avatar
Thread Starter
Member
 
Joined: Feb 2016
Posts: 35
Likes: 11
Default Another new guy here.

Well, I have been reading for a while and guess it is time to become an actual member of the online community.

I've had a couple Broncos in the past and was most recently running a GMC Sierra z71. I needed to get a newer truck that wasn't breaking down in the woods so I returned to my Ford roots and got a 2004 F-150 4x4.

It is an extended cab with a 2.5 or 3 inch leveling kit. (Was already on the truck so unsure which) 5.4 liters under the hood and an open rear differential until I can get a limited slip under the back and a locker up front. I am running 295-75-17 Super Swamper M-16s.

I live in the Florida Panhandle where we have some thick mud and quartz sand. Among other things, I make my money as an art photographer and needed a vehicle that would do well off road to get me where most people can't and needed a pickup to haul my kayaks without having to put them on a roof rack.

Anyway, just thought I would introduce myself.

JC
Attached Thumbnails Another new guy here.-fbtruck.jpg  
Reply
Old Feb 7, 2016 | 08:32 PM
  #2  
Dennis Kesik's Avatar
Junior Member
 
Joined: Feb 2016
Posts: 1
Likes: 0
Default

2006 f150 keeps blowing fuse 14. I took it in and they said they repaired corroded harness wires from abs module. They put a 15 amp fuse in and that blew after I drove it for a while. It's supposed to have a 10 amp. They told me if the fuse blew again that the abs module needs replacing. Could a bad abs module cause the fuse the blow.
Reply




All times are GMT -4. The time now is 05:41 AM.