Torque app and 6R80 trans temp
#1
Torque app and 6R80 trans temp
2012 5.4L 6R80 Expedition
I found the following info on PIDs for monitoring the Transmission Temp.
Transmission Temperature
"OBD2 Mode and PID" = 221E1C
"Long Name" = Trans Temp
"Short Name" = Trans T
"Minimum Value" = -40
"Maximum Value" = 260
"Scale Factor" = 1
"Unit Type" = deg
"Equation" = (((signed(A)*256)+B)*(9/8)+320)/10
( Not sure about the equation. Found an alternative : ((signed(A)*256)+B)*9/8+32 )
Torque says "No response. No data"
Ideas ?
I found the following info on PIDs for monitoring the Transmission Temp.
Transmission Temperature
"OBD2 Mode and PID" = 221E1C
"Long Name" = Trans Temp
"Short Name" = Trans T
"Minimum Value" = -40
"Maximum Value" = 260
"Scale Factor" = 1
"Unit Type" = deg
"Equation" = (((signed(A)*256)+B)*(9/8)+320)/10
( Not sure about the equation. Found an alternative : ((signed(A)*256)+B)*9/8+32 )
Torque says "No response. No data"
Ideas ?
#2
You could try the alternate TFT PIDs listed here:
http://www.scangauge.com/support/x-g...cific-xgauges/
Under the CANSF category, TxD column ...
MGD
http://www.scangauge.com/support/x-g...cific-xgauges/
Under the CANSF category, TxD column ...
MGD
#3
You could try the alternate TFT PIDs listed here:
http://www.scangauge.com/support/x-g...cific-xgauges/
Under the CANSF category, TxD column ...
MGD
http://www.scangauge.com/support/x-g...cific-xgauges/
Under the CANSF category, TxD column ...
MGD
#4