Tailgate Mat
#1
Junior Member
Thread Starter
Tailgate Mat
Bought a Husky bed liner. Can't find that they make a mat for tailgate. Found one I like but it requires holes be drilled. I'm having a hard time with drilling holes in a brand new truck. Suck up and drill? Is there something else?
#2
TOTM 8/2019
#3
Senior Member
#4
(remove a couple bolts, lay mat down, drill mat, reinstall factory bolt)
#5
Senior Member
Agreed, remove the panel used to reach the back of the tailgate handle, take the bolts to the local hardware store and find similar size/thread longer to compensate for the thickness of the mat, drill holes into the mat using the the tailgate panel as a template and screw it back it in.
#6
Senior Member
I had the same issue with a different brand tailgate mat. Tried industrial strength Velcro tape.
Did not work !!!
Since I had the bed sprayed with Line-X when new I don’t really need the tailgate mat and have not used it in the truck.
I think you will need to bite the bullet and drill holes.
Did not work !!!
Since I had the bed sprayed with Line-X when new I don’t really need the tailgate mat and have not used it in the truck.
I think you will need to bite the bullet and drill holes.
The following users liked this post:
m2mc2 (04-24-2024)