2005lariat5.4

The wax I used on my truck stained some of the plastic parts such as the door handles. As you can see in the pic its pretty ugly. Anyone have a solution for cleaning it up until I get painted door handles? Nothing I've tried has worked yet. Its an 05.

Railroad

What all have you tried? Probably will need hot water, a stiff toothbrush and a good quality soap. If you don't have luck here there are a number
of detailing forums thats discussed this same thing.

Big. D

I've used a tooth brush and dish detergent before. YMMV

trickster

The best thing I've found is to clean real good wipe them down with a grease and oil remover and paint them.

SJP

To get that wax off use peanut butter and yes it works.

rbrais

Magic Eraser, but it is hard to get into all the divots. It helps a lot, though.

mrecoolgar

I haven't tried it yet.

techrep

iTrader: (1)

Back to black or black restore made by Bondo...

rbrais

That doesn't remove it, just covers it up for a bit.

techrep

iTrader: (1)

Black restore coverd up mine and never seen it again...I call that removed...BTW ArmorAll Ice will not leave white on your trim..