Radar setup
#1
Member
Thread Starter
Radar setup
Around nov ill be getting the valentine one radar..want to find out if possible to run the power thru the mirror or something instead of the cig lighter.if any one has done it pls share...pics would be great as well. Dont want the hanging wires..
#2
Junior Member
I tapped into the mirror using an Invisicord. Also have a V1 in each car. I bought the mini cord (smaller connectors). No pics right now, wife has the truck. It is very clean though.
Last edited by DaveC6; 10-16-2012 at 12:09 AM.
The following users liked this post:
Hattp6 (10-17-2012)
#4
Member
http://www.fordf150.net/forums/viewt...685324#p685324
The following users liked this post:
Hattp6 (10-17-2012)
#5
Senior Member
My Escort 9500ix is ran to the passenger side fuse panel with a fuse tap. Works like a charm. Took me every bit of 5-7 minutes once I knew what fuse I wanted to run it to. Shove the line right at the top of the windshield and over, down the pillar and bam you're there.
#6
These are the products I used for my radar.....I used the blendmount and the hardtap hardwire kit.
http://www.blendmount.com/products.html
Looks Great. Im at work now so and my pics are on my home computer.
http://www.blendmount.com/products.html
Looks Great. Im at work now so and my pics are on my home computer.
The following users liked this post:
Hattp6 (10-17-2012)
#7
Member
Thread Starter
you got any pics of your setup bud...thank you
Trending Topics
#8
Member
Thread Starter
These are the products I used for my radar.....I used the blendmount and the hardtap hardwire kit.
http://www.blendmount.com/products.html
Looks Great. Im at work now so and my pics are on my home computer.
http://www.blendmount.com/products.html
Looks Great. Im at work now so and my pics are on my home computer.
#9
Senior Member
I will get some tonight for you. I had a blend mount in my Chevy but the Ford stem is a different size so it wouldn't work. Mine is up high where you can't even see it because I have a tint brow.