Need Help
#1
Need Help
I have a 2016 F-150 Fx4, While driving on several occasions the transmission will jolt and it loses power. As this happens the gear display ie Park,Reverse,Neutral,Drive on the display starts flashing or goes blank and the truck loses power. My guess is electrical. Please help don't have much money and it's not under warranty
#2
Senior Member
For starters -You need to go to Autozone (or other) and get the Diagnostic Trouble Codes (DTCs) read, its free. Is the check engine light illuminated? DTCs can be present without check engine light.
#3
The 4x4 code came on then went away and the check engine came on and went away. I originally I diagnosed it as the 4x4 shift module was going out because it is common but after unplugging it for a week it did the same thing. Next step is reading the trouble codes next. I appreciate it
#4
Senior Member
I should have mentioned this in Post #2. When you go to an auto parts store and they provide you with a print-out of your DTCs it will also list possible causes for the DTC and the repair parts associated with that DTC. Report back to this forum with the DTCs before you start buying parts from that list, the auto parts companies want your money and will encourage to spend it.
DTCs are the first step and further analysis heads you in the right direction.
What engine do you have?
DTCs are the first step and further analysis heads you in the right direction.
What engine do you have?
#5
Senior Member
osbornmissouri...
.
- There are year specific forums which better serve non-general F-150 issues/topics..
-
Consider putting your complete vehicle information (year, model, cab, trim, engine, wheelbase, _x4 drive, mileage) in your signature to have it automagically included when you post.
» Edit Signature ««« -click-
*You have to be logged-in and don't forget to [ save ] it.
**If you're posting with a non-PC ap' insure that "full version" is selected to work properly.
#6
Ignition disconnected somewhere?
I have a 97 f150 5.4l and the key spins freely in the ignition. Not all the way around, but like 180 degrees. To where it would be if you were starting it. And with no resistance I mean nothing. It’s like the ignition is disconnected right where the tumbler is connected, I really don’t know. Any suggestions?
#7
Senior Member
Babz...
.
Repair or replace the ignition switch.
.
-
*Heads-Up* You've hijacked the thread with an issue that is not germane or relevant. Create your own thread in the appropriate year specific forum.
. - There are year specific forums which better serve non-general F-150 issues/topics..
-
Consider putting your complete vehicle information (year, model, cab, trim, engine, wheelbase, _x4 drive, mileage) in your signature to have it automagically included when you post.
» Edit Signature ««« -click-
*You have to be logged-in and don't forget to [ save ] it.
**If you're posting with a non-PC ap' insure that "full version" is selected to work properly.
Trending Topics
#8
Senior Member
Babz, welcome but you should start your own thread over at the 1997-2003 section here.
https://www.f150forum.com/f6/
https://www.f150forum.com/f6/