When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
From: Sonoma wine country/Left coast is the best coast
Originally Posted by F150_423
If I knew where that power source might be, I'd probably do that, not that it is necessary to have fast charge, but it would be nice to have it if needed.
Hardwire directly from the passenger kick panel fuse box.
This is my solution. 20 bucks. I also have the flat shelf insert thingy. Fits really good and the phone stays put. Keeps the phone topped off while streaming music via android mobile.
Last edited by F150-4-LIFE; Oct 17, 2025 at 07:37 PM.
yeah, I would definitely be willing to make and sell it. I can do it with or without the charger. Any 56mm Qi charger will work in it. Just so you know up front, it isnt a fast charger, it plugs into the usb outlet in the pocket, i have also added a hole on the front right side for a usb cable to be pulled out for a second phone to be charged. DM me if your interested.
I have the 40-20-40 bench seat. Could you make it for the phone resting area on the fold down? I would have to figure out the wiring, but I might be able to get that done.
Not sure if you got my message, but if you are wanting one, depending on whether you want it with the charger like I have, or you want to order your own charger, I would do $40 without charger plus shipping, or $60 with charger plus shipping. Let me know if your still interested.
I did not get a DM from you. I am looking at charging pads. I dont want it plugged into the C port. Im trying to figure out a T-harness to intercept signal from that plug.
I wanted a wireless Qi charger for my 2022 F150 XLT but didn't want to pay the big prices for the ones I found online and do all the wiring involved, so I designed and 3D printed my own! It's also compatible with Magsafe!
.
I built one for the recess where your shifter can fold down into it. The problem I had was the USB-C port didn't have enough power to provide to the magsafe puck. I am thinking about rerouting one of the ports out of the console to it but I haven't dove in that far yet.
