When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 2010 F150 XLT with manual folding mirrors. I purchased Ford OEM power folding mirror pedestal frames and need to switch out my existing frames for the power folding frames. I know about wiring needed, but can’t find info on how to remove my existing mirrors and housings and mount them to the new power folding mirror pedestal frame. Any advise welcome. Power folding mirror frames Close up of power folding frame Existing manual folding frame with mirror housing Existing manual folding frame with mirror housing partially folded
The glass comes off first, it takes some doing with some small hook tools to get the fingers that hold it in place.
Then you can remove the screws that hold the mirror cap on.
Then you have to remove a lock clip but it is under tension with a spring, past that, I cannot help, I gave up and replaced the mirror assembly before I hurt myself.
The glass comes off first, it takes some doing with some small hook tools to get the fingers that hold it in place.
Then you can remove the screws that hold the mirror cap on.
Then you have to remove a lock clip but it is under tension with a spring, past that, I cannot help, I gave up and replaced the mirror assembly before I hurt myself.
Thanks for supplying a starting point. Anyone able to complete the process??
Mirror frame changeout
