It's hard to see but L is under the black marks " driver side
Passenger side
Driver side
I bought a 2007 Ford F-150 5.4 with about 163000 miles. First week I got it i heard a rattle in the engine at start up then goes away with in 5 seconds and drives fine. Took it to a shop and said it was the phasers. So I order a kit from Freedom racing. Phasers, tensioners, chains, guides, oil pump. Not the VCT sensors. So I timing it with the crank gear at 11 (teeth) dot on 6 o clock, then timing chain with the marks on the gear and on both phasers match driver side "L" passenger side "R" I've triple check the timing. Put everything back together removed fuel pump fuse so I could built oil pressure first, then I put fuse on and started up and ran rough and code p0022 come up and p0358 come up. This is my first Ford timing chains I've done. Any help or ideas would help me figure this out. Not sure if my cam lobe are right direction.

 

Still have no clue if the timing is off or right done want to put it together till I know for sure

 

http://www.ford-trucks.com/forums/79...placement.html

Could possibly help you out.

 

<br />Thanks you. I've seen that and help at first.