How do I remove this
How do I remove this
Senior Member
Joined: Oct 2010
Posts: 744
Likes: 38
From: King of Prussia, PA
My guess it's probably applied by 2 face tape. Try a heat gun and see if it loosens up.
Forget what I said above.
After doing a quick Google search everything says there are clips and basically get a flat bar or long flat head screw driver and start prying up. Supposedly there are a lot of them but not accessible from the under side of the rail and some will break.
Forget what I said above.
After doing a quick Google search everything says there are clips and basically get a flat bar or long flat head screw driver and start prying up. Supposedly there are a lot of them but not accessible from the under side of the rail and some will break.
Last edited by haha; Feb 25, 2011 at 11:08 PM.
Thread Starter
Senior Member
Joined: Feb 2011
Posts: 446
Likes: 1
From: NE PA
My guess it's probably applied by 2 face tape. Try a heat gun and see if it loosens up.
Forget what I said above.
After doing a quick Google search everything says there are clips and basically get a flat bar or long flat head screw driver and start prying up. Supposedly there are a lot of them but not accessible from the under side of the rail and some will break.
Forget what I said above.
After doing a quick Google search everything says there are clips and basically get a flat bar or long flat head screw driver and start prying up. Supposedly there are a lot of them but not accessible from the under side of the rail and some will break.
Thread Starter
Senior Member
Joined: Feb 2011
Posts: 446
Likes: 1
From: NE PA
My guess it's probably applied by 2 face tape. Try a heat gun and see if it loosens up.
Forget what I said above.
After doing a quick Google search everything says there are clips and basically get a flat bar or long flat head screw driver and start prying up. Supposedly there are a lot of them but not accessible from the under side of the rail and some will break.
Forget what I said above.
After doing a quick Google search everything says there are clips and basically get a flat bar or long flat head screw driver and start prying up. Supposedly there are a lot of them but not accessible from the under side of the rail and some will break.
