HELP... how to change the view on the dash...
Thread Starter
Junior Member
Joined: Mar 2019
Posts: 14
Likes: 0
HELP... how to change the view on the dash...
2016 f150 lariat
How can i change the default startup view on the dash, it always starts on towing information, i want it to start showing my digital speedometer? thank you.
How can i change the default startup view on the dash, it always starts on towing information, i want it to start showing my digital speedometer? thank you.
5 Year Member
Joined: Jul 2018
Posts: 708
Likes: 216
From: NW Penna
I use the favorites screen or whatever it's called. Whatever I leave it on when I shut it off is what it is on when I start it.
You can configure your favorites screen with I think 6 different screens including the digital speedometer.
You can configure your favorites screen with I think 6 different screens including the digital speedometer.
SSM 47314 - 2015–2018 F-150/2017-2018 F-Super Duty/2018 Expedition/Navigator - Instrument Cluster Defaults To Trailer Tow Set Up Every Key Cycle With No Trailer AttachedSome 2015-2018 F-150,2017-2018 F-Super Duty,2018 Expedition/Navigator may have concerns where the instrument cluster defaults back to the trailer tow setup screen every key cycle with no trailer attached. Refer to the Information Display section of the Owner’s Manual or the following steps to correct this concern. Type 1 and 2 Cluster small display – Use the information display controls on the steering wheel and the information display menu. Navigate to Towing and press OK, select Trailer Options and press OK, choose Select Trailer and press OK, finallyselect No Active Trailer and press OK. Type 3 Cluster large display – Use the information display controls on the steering wheel and the information display menu. Navigate to Towing tab, select Trailer Setup and press OK, then press OK to enter Trailer Options, select Change Trailer Selected and press OK, finally select No Active Trailer and press OK.
