cjr713

has anyone had this problem I get these two codes (1) P0715 & P106. With these my gas pedal feels like there nothing there then the truck takes off. 1 code is input /turbine speed sensor and the other is throttle Actuator are bad I had both replaced plus the harness to. still get the same codes come up. both times AAmco work on it when the pedal gets light I look at the odometer holds steady as does the tachometer. I also had the alternator replaced they thought that could also be the problem.

bubbabud

1st welcome to the forum.
2nd need more info year, model, engine trans. etc.
3rd sounds like your just throwing parts at it. have it scanned by some one who has the equipment an knowledge to properly diagnose.
4th JMO I wouldn't let AAmco shine my shoes. They are in the business of selling transmissions and warranty's. good luck in your quest for answer's

cjr713

it's a 2005 ford f150 4x4 with a 5.4 liter with a 355 rear end also it seems like the 4x4 stop working around the same time I can hear it engage high and low lights show on the dash but the wheels don't engage don't know if it has anything to do with it.

intofx

Dealer had to replace my gas pedal. Truck would go into limp mode with a hill start assist warning, hill decent control fault, powertrain malfunction, forward collision warning, restraints indicator lamp warning. Cruise control gets completely turned off as well. They said the pedal was sending bad voltages. I pick it up today, hope its fixed.

Tetramethyl

pet·al
ˈpedl/
noun
noun: petal; plural noun: petals
each of the segments of the corolla of a flower, which are modified leaves and are typically colored.

ped·al
ˈpedl/
noun
noun: pedal; plural noun: pedals
1.
each of a pair of foot-operated levers used for powering a bicycle or other vehicle propelled by the legs.
2.
a foot-operated throttle, brake, or clutch control in a motor vehicle

jefford

Oops