Hello everyone this is my first post on here being this is my first Ford F-150 also. I have a forscan tool and I did that Global Window Open/Close. And I've been trying to find out how to get the back side windows to go up & down. does anybody on here know how to have the trucks rear windows to go up & down with the global windows? I tried searching on here and I just can't find or just can't see it on here. My dad has a Lincoln MKS that all four Windows go down and I wish I could look into that computer to see how it's done but I'm too scared that I'm going to mess something up.

 

Welcome! The backs wont do it they are not the same, auto up and down, like the fronts.

 

So the hole thing is the auto up and down
Ok that makes sense to me

 

How to you do the GLOBAL WINDOW? I have FORSCAN and need to know how to do. Any help please. Steve

 

https://docs.google.com/spreadsheets...#gid=815852466

I hope this works out for you just make sure you are very familiar when you start changing things so nothing else gets screwed up I just watched a bunch of videos on YouTube about the Forscan and how to use it.

 

The front windows have control modules that handle the auto up/down, but the rear windows do not. You could buy an additional set of control modules to add auto up/down to the rear, but you will be figuring out the wiring on your own, and you cannot add global to the rear since that command comes through the canbus.

If you are dead set on adding single-touch control to the rear windows, my suggestion would be to pick up an IED window controller and interrupt the rear window wires. Do that and run interrupted power to the module, done.