Floor mat
Thread Starter
Senior Member
Joined: Mar 2014
Posts: 313
Likes: 111
Floor mat
I have the husky floor mats in my 21 and somehow i lost one of the retaining clips in the floor mat. Not sure how that happened since it is 2pc in the mat itself and yesterday was the first time i took the mat out to clean it. Looking for replacement and have had no luck anyone have a amazon link or a link for 3d print file i can use? I thought i found a 3d print file but its 2 small and will not snap together. Local ford dealer has no clue even though these are the mats they sell..LOL
Senior Member
Joined: Apr 2025
Posts: 321
Likes: 244
From: Salt Lake City
https://huskyliners.com/contact-us/
You could ask the vendor themselves, if they have a replacement part available.
Also you could resize your 3d print in your slicer software. Upsize it 5%, reprint, see if that works. Using a caliper measure you could measure the inner diameter of the grommet hole in the mat, and the outer diameter of the grommet you printed to estimate how far off you are. Maybe it's only 2%, for example. Or measure the outer diameter of the peg in the floor of the truck, and the inner diameter of the peg hole in the grommet you printed, and upsize based on that difference.
You could ask the vendor themselves, if they have a replacement part available.
Also you could resize your 3d print in your slicer software. Upsize it 5%, reprint, see if that works. Using a caliper measure you could measure the inner diameter of the grommet hole in the mat, and the outer diameter of the grommet you printed to estimate how far off you are. Maybe it's only 2%, for example. Or measure the outer diameter of the peg in the floor of the truck, and the inner diameter of the peg hole in the grommet you printed, and upsize based on that difference.
Thread Starter
Senior Member
Joined: Mar 2014
Posts: 313
Likes: 111
Ya guess ill have to contact them and get some replacement's.. Still trying to figure out how i lost both PC..
If i was going to play around with sizing and such i would just grab the 3d scanner and create my own file to do the print.. Really do not feel like putting that much effort into it..
If i was going to play around with sizing and such i would just grab the 3d scanner and create my own file to do the print.. Really do not feel like putting that much effort into it..
Thread Starter
Senior Member
Joined: Mar 2014
Posts: 313
Likes: 111
Contacted husky yesterday morning and within a few hours i had a email saying they were shipping them out at no charge even though i stated i would pay for them... Now that is some fantastic customer service.. Now if only i could get that service from my local furniture store where i spend a stupid amount of money on a reclining chair with all the goodies on it that does not work as advertised.. Been waiting 6 months for replacement electronics, told them saturday that if it is not fixed soon its going to be on their front lawn one day when they come in with a big sign on it saying they do not take care of their customers. Pretty sad as i have been dealing with this place for 20 years and they have always went above and beyond to make sure customers are happy.