I have a 2012 F-150 Fx4 with a 2.5" level. I have been running 2" spacers for alittle while unitl the lugs broke off the spacer. I am now in the market for some new offset rims with the same amount of "Stance". I have been looking at the Dropstars DS645b 20X10 -19 offset. Do any of you know if you can fit -19 offset on a leveled f150?
Thanks!
Ill be running 33 12.50 20 Toyo M/ts

 

I rubbed a little with a 33x13.50 on 18x9 -12 offset rims with a 3" level. It's gonna be a little harder on you since you have wider rims and less lift but they should probably fit with a little trimming.

Just looked those up, good looking wheels! I hate when they have two bolt patterns, but at least the center cap will cover the extra holes. And since Fords have a bigger hub bore then chevy hopefully yours will fit hub-centric instead of lug-centric. Hard to say though they might make the hub bore extra big to fit a lot of different applications.

 

I appreciate it! If i did my calculations correct with 2" spacers on stock rims i would have been running -7 offset. It was very close to rubbing, but nothing that a little trimming wouldn't fix. Im just afraid it hitting the fender by the door where trimming is not an option.