Topic Sponsor
Pre- 1987 / Classic Corner Have a classic Ford F150 truck? Want a classic? Discuss your pre-1987 Ford F150 truck.

please help

Thread Tools
 
Search this Thread
 
Old Oct 13, 2014 | 07:16 AM
  #1  
daspecialis's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2014
Posts: 3
Likes: 0
Default please help

I have 1986 f150 and i have replaced the ignition coil, rotor, plugs, wires, fuel filter, dual tank selector and the truck will not start. Please help me running out of ideas
Reply
Old Oct 13, 2014 | 08:30 AM
  #2  
klricks's Avatar
Senior Member
 
Joined: Feb 2009
Posts: 709
Likes: 31
From: Grants Pass, OR
Default

Hope you don't run out of money before ideas......
What is engine size? EFI or Carb?
Reply
Old Oct 13, 2014 | 11:17 AM
  #3  
daspecialis's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2014
Posts: 3
Likes: 0
Default

It has a 302 and its efi
Reply
Old Oct 14, 2014 | 07:46 PM
  #4  
klricks's Avatar
Senior Member
 
Joined: Feb 2009
Posts: 709
Likes: 31
From: Grants Pass, OR
Default

Is there fuel at the fuel rail? Check the schrader valve on the driver side fuel rail. See if fuel squirts out or better test pressure with a gauge.

Do you get a good spark at the plugs? If nothing and you are sure the coil is good then some possibilities are the TFI module on the distributor and/or the pickup module inside the distributor. Some auto-parts stores can test the TFI for you.
Reply
Old Oct 15, 2014 | 08:09 AM
  #5  
daspecialis's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2014
Posts: 3
Likes: 0
Default

Yes there is fuel in the fuel rail has good pressure also
Reply




All times are GMT -4. The time now is 05:37 PM.