I am installing a Holley 4160 on my 86 F150 351W HO. I am not sure where to connect the EGR and dist. The carb has one spark port and 2 ported vacuum. Do I just T both lines into the spark port or is there another place for the egr?

Any help would be great!

 

Ok I have a 1985 with the same setup. The Dist. goes to the spark port on the carb., on mine the EGR is routed around the world. Here are some pics, the first is where the line from the EGR is routed to the upper port of a vacuum tree (see ink pen pointer) then out the lower port to a 4 way interconnect one goes straight through to the vent at the top of the carb. (the third pic shows a T with a cap touching my finger), the second line (on left from front of engine looking at 4 way) goes to the lower connection on another tree above the water pump, the third (out right side) goes to a relay controled connection on the left fender below the brake master cylinder. Hope this helps.

 

Bump Any updates?