I Have An 85 F150 4X4 With The Efi 302 In It That Recently Locked Up. I Found A Good 351 Carbed Motor And Want To Put My Upgraded 302 Heads Cam And Intake On To That Just TokKeep The Factory Fuel Injection. Are There Any Issues I Will Come Across In Doing This? And Would I Have To Worry About The Computer Not Reading Everything Properly. Thanks

 

There are several things to be concerned about. The intake won't fit, the flexplate will most likely need to be changed depending on your trans and donor trans, a 351 is about 7" wider . The ecu and sensors should work. I did this with a 90 f150 and a 351 from a 93 bronco.