Topic Sponsor
Pre- 1987 / Classic Corner Have a classic Ford F150 truck? Want a classic? Discuss your pre-1987 Ford F150 truck.

1986 F150 problem

Thread Tools
 
Search this Thread
 
Old Mar 27, 2013 | 11:32 AM
  #1  
old man two's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2012
Posts: 2
Likes: 0
Question 1986 F150 problem

Recently decided to sale 86 F150 after I purchased another 02 4X4 F150. Pulled 86 from shelter to clean but it died, Can"t get fire to plugs, fire to coil but does not seem to be exiting coil. Replaced coil but no help. Kinda stuck on next step. Any help appreciated. 302 fuel injected.

Old man two
Reply
Old Mar 27, 2013 | 11:11 PM
  #2  
JayzDaddy's Avatar
Senior Member
 
Joined: Jan 2013
Posts: 536
Likes: 50
From: Covington VA
Default

Check specs on new coil too. New parts are bad sometimes. It its good check the ground. You sure nothing is commin out of the coil wire. Do you have a icm and is it bad? I have a 300-6 and my icm is mounted on my dizzy.
Reply
Old Apr 14, 2013 | 02:40 PM
  #3  
old man two's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2012
Posts: 2
Likes: 0
Default stii no fire 86 ford

replaced icm when I replaced dist. Have rechecked for fire at coil wire but nothing happening.located and replaced ecc relay but no help. intend to replace ecc iv when it comes in. Has been strange since I had a loose ground at the battery and corrected that problem. since has been eratic run good then die. heard the fuel relay click then would run again for few minutes. now no fire, no run. thanks to parts house for allowing all the take backs. otherwise would have much more invested in this problem.

old aggravated man

Last edited by old man two; Apr 14, 2013 at 02:43 PM. Reason: spelling
Reply




All times are GMT -4. The time now is 03:19 PM.