1975 F150 SuperCab
#11
Change frames, I don't think there's really a difference in the frames themselves. I guess you could probably just change out the front end and rear end. Then badges of course, I'm not sure though. My uncles got a 78 f250 crew cab cool trucks man
#12
You can eithe do a body swap to an f250 supercab frame or do a drivetrain swap which is rear end front end and all springs/shocks and any 73-79 bed should work f250 or f150 just all depends on your wheel base
#13
You can change the rear leaf springs and put the Dana 60 from a 3/4 ton under your truck. Have to change the yokes on your drive line to fit the 60. Unless you can grab the rear driveline from a 3/4 ton super cab long bed. Then pull the front spindles, brakes, and springs from a 3/4 ton. They'll bolt in place of your 1/2 ton parts. Same front twin ibeam between 1/2-3/4 ton. Frames are the same. I'm planning to do this but with 4x4 parts.
#14
ok I have made up my mind to go with a f250-350 4x4 frame. After seeing some pics I am really impressed. There seem to be a lot of donar vehicles around that would fit this. So the next question is what frames etc will interchange with the 75 supercab longbed? My research says that a 4x4 supercab was not produced in 75, but it was in later years. What should I look for? Will a crewcab 4x4 frame etc work? I do want to go with the full length bed. Also will the 460 I now have work with the trans etc?
#15
can anyone tell me what color the number 4 in the VIN is ? I looked it up on a chart someone had posted but it only listed alphabet type codes and nothing numeric. (1975 F150 Super Cab)