What did you do to your 14th gen today
#2421
I ordered my Peragon Limited Bed Cover with $250.00 off. If you are interested use the code ""BFSUB250" " at checkout.
Not interested in LimitedHD? Use the above code and receive $100 off the Platinum Edition or $50 off the Classic Edition.
https://www.peragon.com/shop/covers/Ford/F-150
Not interested in LimitedHD? Use the above code and receive $100 off the Platinum Edition or $50 off the Classic Edition.
https://www.peragon.com/shop/covers/Ford/F-150
#2422
Senior Member
Installed OCD screen protector and scuff guards
The following 4 users liked this post by fatty 239:
#2423
Senior Member
#2425
Senior Member
The following users liked this post:
Abn150 (11-26-2022)
The following 5 users liked this post by Pruitt146:
69charged (11-27-2022),
foxx4afoxx (11-27-2022),
Je1279 (11-26-2022),
MyBeast (11-26-2022),
Scrambler68 (11-26-2022)
#2428
The following users liked this post:
foxx4afoxx (11-27-2022)
#2429
Senior Member
Guys,
I ordered and installed the Flowmaster SS tips in the 3'' inlet size. They are very well made and pretty and that's the good news. The bad news is that the OD of the existing tailpipe at 3 and 1/8" same exact diameter as the inlet of the tips.
I simply chopped of 1 foot of tailpipe and tacked the tips on then welded them.. While I was at it, I re-angled the the tips in order to get the assembly closer to the body, an improvement IMHO. The sound is roughly the same as before.
QuickRick
I ordered and installed the Flowmaster SS tips in the 3'' inlet size. They are very well made and pretty and that's the good news. The bad news is that the OD of the existing tailpipe at 3 and 1/8" same exact diameter as the inlet of the tips.
I simply chopped of 1 foot of tailpipe and tacked the tips on then welded them.. While I was at it, I re-angled the the tips in order to get the assembly closer to the body, an improvement IMHO. The sound is roughly the same as before.
QuickRick
The following 4 users liked this post by QuickRick52:
#2430
Official Ford Account
iTrader: (-2)
I finished my 2" Bilstein 6112 level on my PowerBoost this week along with the 5160's in the rear. After the level, I couldn't stand looking at the air dam. Honestly I don't hate the active aero aspect, but mine was taken out from a tire tread on the highway in the first month of ownership and I refuse to replace it just to have it break again since it seems rather fragile. I taped off the air dam with 1" blue painters tape just to keep a consistent trim line below the tow hooks and went at it with a 12v Milwaukee Hackzall and a fine toothed steel blade, it was really easy. I love the way it turned out, just thought I would share some photos here as well.