Can anyone recommend a good leveling kit for a 25 f150 tremor that will not break the bank? Looking for complete struts. Bonus if there is a black friday deal on it

 

My understanding is it has a leveling kit from the factory.

 

It does not.

 

The tremors are lifted approximately 1" above factory front and rear. The max you can usually get away with is a 2" top spacer anything more than that you can run into CV bind because technically it's a 3" level on a regular f150 the different knuckle and uca do help but it you take a look at a few posts on the tremor forum some people have had some issues. Another thing people are doing is swapping the rear 2.25" block for the regular f150 1.25" to lower the rear a bit. If you use a 1.5" spacer from what I remember you'll have to trim the studs on the strut mounts a bit. There's a kit out there I can't remember the name maybe pro comp that uses a top spacer combined with a preload to help reduce the CV angles at full droop.

 

I use a 3 inch front 2 inch rear block with absolutely no issues. Been like this 2 years

2010 f150