Has anyone put in subs in a 2023? if so, what harness did you use? is it the same as the 2020 and up models? mine does not have B&O. ordered the wrong harness and not sure what to use. i’m planning on getting 2 mojo mini 6.5s in a box for under the backseat.

 

Buy the harness for base system from Sounds good stereo . I did, and it is phenomenal

 

@sniper307 could you send a link?

 

could you send a link @sniper307

 

https://soundsgoodstereo.com/product...-ford-vehicles

 

@sniper307 did this plug straight into your radio and then straight into the amp? did you need a line out converter or anything extra to go with this? also, what ends did you get? RCA, speaker wire, or kicker key loc? if you could give me a brief explanation that would be great and help me out a ton. thanks

 

So this plugs in directly behind the factory ACM ( radio) and I ran it to the rear of the truck. I chose the one with the RCA ends because I was going straight into a 4 channel amp with a pre out channel. The returning end of this harness has speaker wire level which comes out of amp and back to harness behind ACM which amplified door speakers. I used the pre out channel to feed a mono amp for one single ten sub under the back seat. The only thing this harness doesn't provide is power and ground. It does include a remote turn on if your amp needs it, and it has load resistors already wired into the harness. Like I said before, great product and made this audio system come alive. I changed my 4 door speakers to Focal 6.5s

 

@sniper307 you got any pics of the connection from the harness to the amp? could you post one?

 

@sniper307 and since you’re the pro, could i do the same thing you did with the rcas and all with a Kicker 46CXA8001 amp?

Kicker 46CXA8001

 

Just ask @SoundsGoodStereo . They are very helpful and usually active on the forums.