I noticed my back wheel wells have no liners in them which I don’t think is a big deal. However there are two metal clips which to me looks like there was a liner in there. It’s a 2022 xlt and I have ordered the husky liners for it. Just curious if there is supposed to be something in there.

another thing. I started my truck yesterday and played some music. There was nothing coming out of the left speakers. Panner was correct. Even panning left. Nothing. Had to turn off truck and back on and that fixed it. Odd. Anyone have this issue?

 

Welcome. Nope you are not missing anything in the rear wheel wells. As for the music not coming out one speaker, then it coming back after a restart. Your radio is a mini computer sometimes they have to be rebooted. Keep track of it but I wouldn’t worry about it yet.

Mike

 

No wheel well covers from the factory unless you specifically ordered or your truck was optioned with them.

This may sound like an excuse but, your truck is a rolling computer. Sometimes the program (Radio fader/balance) application doesn’t load correctly. A soft reset (Power & >>) pressed & held simultaneously until the screen restarts or simply turn off/on the truck may clear up any software glitches.

There are many other options on this forum that may work for you as well.

Congrats on the new Truck.

 

I recommend turning off the truck and opening the drivers door for a few seconds then closing and restarting. I used have problems with Android Auto dropping out. The only way to get it to restart was this process.

 

The entire truck is a rolling computer with multiple systems that sometimes, just don't want to work together as intended. Its something that afflicts every manufacturer.

 

If the clips are already there then their was Liners there at one time .

 

Agree, I installed the OEM liners and the clips came with them. It appears that someone removed the liners. There was also some brackets that were to be installed at the rear of the wheel wells. If they are not there, there will probably be some marks where they were.
Or….if yours was an ordered truck, maybe someone started to install them at the factory and the realized it was not on the build sheet.

 

My radio has done it a few times.
Though, only one time it did not come back the next time I drove it.
Dealer was 100% useless with any help or knowledge of it.

 

Check with the dealer to see if the liners came with it. I think they were removed or possibly stolen since the clips are there.