Good day,
I have a 21 F150 Lariat and i was about to do some forscan adjustments but noticed the DTCs.
i know i can do some calibration of the IPMA but not sure which calibration to do, i think i have a few options like rear camera, lane departure or trailer maybe 1-2 more.
have the reverse brake asidsit not working, think the tailgate was off at some point for the bed liner, not sure if its related or not
here are the codes, cant reset any of them:


IPMA U3000:49 (Control Module)
Internal Electronic Failure
Status (-28):

• Previously Set DTC - Not Present at Time of Request

and
IPMA B115E:78 (camera Module)
Alignment Or Adjustment Incorrect
Status (-2F):

• DTC Present at Time of Request
• Malfunction Indicator Lamp is Off for this DTC

 

you will want to run the 360 calibration and after that the alignment code should go away but you might not be able t run that since you have to have all other codes clear before it will run. also you must be ready to spend a lot o time driving around a parking lot at a very slow speed while the calibration is running

 

i dont have the 360 cameras, just the tailgate backup camera. Still do the 360 one?