FORScan - 14th Gen F150s
#952
Senior Member
The following users liked this post:
Airborne_Ape (08-21-2021)
#953
Senior Member
Changing tire size today and says Access Denied and Service Procedure interrupted when trying a PCM relearn. It will relearn the TCM all day but cannot get the PCM to work. Updated today to newest version. Not sure what is going on.
#954
It's my first day
#956
It's my first day
If anyone here is using an ELS27 V3 and gets a message in ForScan to update the firmware of STN chip 2120 to V5.6.5. Turn off that notification and don't update it. I bricked mine and I'm not the first person.
Thankfully I have an OBD Link EX as a backup device. Learn from my mistake and uncheck this option.
Thankfully I have an OBD Link EX as a backup device. Learn from my mistake and uncheck this option.
#957
Try the new 2.3.42 that they released today.
https://forscan.org/download.html
https://forscan.org/download.html
Do you have the same DTC?
#958
It's my first day
My Sirus trial expired and I'm not paying $215 / year for it (It's stupid-expensive in Canada).
7D0-01-01 9xxx xxxx xxxx will remove it from the sources list but the APIM has to be hard reset twice to see it disappear. I think this should be added to the common tab in the spreadsheet.
7D0-01-01 9xxx xxxx xxxx will remove it from the sources list but the APIM has to be hard reset twice to see it disappear. I think this should be added to the common tab in the spreadsheet.
The following 2 users liked this post by Airborne_Ape:
Korvotron (08-29-2021),
Need4speed7007 (10-19-2021)
#959
My Sirus trial expired and I'm not paying $215 / year for it (It's stupid-expensive in Canada).
7D0-01-01 9xxx xxxx xxxx will remove it from the sources list but the APIM has to be hard reset twice to see it disappear. I think this should be added to the common tab in the spreadsheet.
7D0-01-01 9xxx xxxx xxxx will remove it from the sources list but the APIM has to be hard reset twice to see it disappear. I think this should be added to the common tab in the spreadsheet.
#960
Senior Member
Done, with the latest ForSacan version from today I did it. I am having a DTC on HCM (Codigo: U2101 ) configuration incompatible for this module, and and warning at start up (check headlamp System see manual) I gess is the same issue that you mentioned on your post. I hope we find out how to eliminate that warning.
Do you have the same DTC?
Do you have the same DTC?