Topic Sponsor
2021+ Ford F150 Discussion of the 14th generation F150.
Sponsored by:
Sponsored by: Real Truck

(Cruise Control Module) B142E

Thread Tools
 
Search this Thread
 
Old Nov 11, 2025 | 07:41 PM
  #1  
mjones6504's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2025
Posts: 4
Likes: 0
Default (Cruise Control Module) B142E

hello all! I feel like I’m losing my mind over this issue. I got the pre-collision alert and no adaptive cruise control. Cleaned both areas and still no luck. Took it to Ford who said to put in a new CCM module (after inspection). Bought a new CCM module from Ford, programmed, and calibrated. Blue cruise worked for approximately 2 hours before the code returned. Worked again for approximately 3 minutes before it quit working, again. Still getting the B142E code even after calibrating again. Does anyone have an ideas or any service bulletins on what could be causing this issue? I wouldn’t assume the bracket, but I guess it’s possible? (wouldn’t this be the first thing the technician would inspect?)

Reply
Old Nov 11, 2025 | 08:21 PM
  #2  
Bluegrass's Avatar
Senior Member
5 Year Member
Community Builder
Community Influencer
Top Answer: 1
 
Joined: Mar 2021
Posts: 4,796
Likes: 2,395
Default

The code is for the forward looking Radar Sensor is out of alignment limits.
Your printout says the same thing on the last line.
The Dealer should be able to set it back up.
Good luck.
Reply




All times are GMT -4. The time now is 04:53 PM.