Hey y’all, I’ve got a 302a High XLT w/o the underseat lockable storage but I’ve got a line on one fresh off a truck for $100. My question is does anyone know if the bolts required to install are on all trucks? I’d assume they are just like the main wiring harness is mostly the same.

if so, does anyone have some dimensions they can give me to see where I need to cut to expose the bolts?

My floor as is, I’m confident the bolts will be between the existing storage and the carpets.

Bolt spots on either side of the storage floor.

Bolts look like this on the truck it came from.

 

$100? I'd go for it! Those bolts might be tack welded in, if so it might be a PIA to secure to floor

 

You may have to move or get rid of your inverter. I'm pretty sure you couldn't get the inverter with the underseat storage....one or the other.

 

Upon inspection it may be possible with it.

 

Very nice box design by Ford, plan to snag one myself. Guessing the price from Ford direct is expensive, also unclear if the mount points are there in a truck w/o it from factory.