I've had this problem on an off since I bought the truck about a year ago. When I try to roll up the drivers side window it will "bounce back" to the half way up position. If I try the 1st up position on the window switch it will 99% of the time bounce back to the half way point. I have to use the 2nd position on the switch to roll it all the way up. At one point it I think there was a OTA update and the problem stopped happening, then a couple weeks later it came back.

Does anyone know either a way to disable it, or put in a training or configuration mode? ( i'm not sure what it's called)

 

I have the exact same truck. It happened to me just last week for the very first time.
I put the driver’s side window up & it went down automatically. The 3rd time it finally stayed up.
I hope someone can get to the bottom of this.

 

Push the button down to open the window, once the windows all the way down hold the button down for 3-5 seconds then lift the button up to close the window all the way once the windows all the way closed hold the button up for 3-5 seconds, repeat if necessary. This is the reset we do on all the vehicles after we reconnect the batteries.

 

Thanks for the reminder. That has worked for me in the past.

 

Thank you Stealthservices.
My concern is that the battery was never disconnected.
Will his keep happening?